![]() ![]() Xeon 5600, Xeon 3600, Core i7-970, Core i7-980, Core i7-990)įor a complete list of supported host and guest the operating systems visit the VMware Compatibility Guide. Intel processors based on the 2010 “Westmere” micro-architecture (e.g.In addition, the following CPUs are supported: code-named “Hondo”, “Ontario”, “Zacate”, “Llano”) Systems using AMD processors based on the “Llano” and “Bobcat” micro-architectures (e.g.A 64-bit Intel or AMD processor with 1.3 GHz or faster core speed, except for some Intel Atom models as well as Hondo, Ontario, Zacate, and Llano AMD processors. Systems using Intel Atom processors based on the 2012 “Saltwell” micro-architecture (e.g. DISCOVER SOLUTION Requirements Requirements for VMware Player and VMware Workstation Pro are the same.Intel Atom processors based on the 2011 “Bonnell” micro-architecture (e.g.*With exception, the following CPUs are not supported: GNU/Linux with NVIDIA drivers that support OpenGL 4.5 and above.For Linux hosts, AMD devices are not supported.For Linux hosts, the latest NVIDIA proprietary drivers are required.For Windows hosts, a GPU that supports DirectX 11 is required.Minimum Requirements to Dark Theme support on Workstation Windows Host Operating Systems:įor 3D Hardware Accelerated Graphics Support: Minimum Requirements to Run Container Runtime on workstation Windows Host Operating Systems: Please refer to vendor's recommended disk space for specific guest operating systems.Additional hard disk space required for each virtual machine.1.2 GB of available disk space for the application.Note that Windows 7 hosts are no longer supported, Workstation 16 will not function on them. VMware Workstation Pro and Player run on most 64-bit Windows or Linux host operating systems: 2GB RAM minimum/ 4GB RAM or more recommended.A compatible 64-bit x86/AMD64 CPU launched in 2011 or later *.For more detail, see our System Requirements documentation. if it isn't you obviously cannot configure anything manually.VMware Workstation runs on standard x86-based hardware with 64-bit Intel and AMD processors, and on 64-bit Windows or Linux host operating systems. of course you need to verify first that your client Ethernet card is working. Basically, this is a networking problem, not really anything VMware specific - if that helps to analyze the situation. If you need an UNC-share for some application, of course then you need to get the networking to work. Just drag and drop between host and client - it works well with GB-class files - the write speed of the disk(s) is the main limiting factor. When you get it to work, open Firewalls and configure properly.įor filesharing, you don't necessarily need any of this. If it doesn't work, check that Host computer doesn't block anything - disable all Firewalls or something and reboot to verify that they are shut. or the testing has been wrong: Your host access might have been OK, but Internet doesn't work because Gateway address is wrong. It kind of sounds that you don't automatically get correct addresses to your client or shuffling between NAT and Bridged may have caused confusion or proper reboots have not been done between trials. Please observe that also Gateway must be correct if you require Internet access. ![]() If your addresses are somehow wrong, change them manually. Please make a note that while ping might work, tcp/ip doesn't really work for all services if you don't boot the Windows computer (talking about client now). Check your address space with "ipconfig /all" - it has to be the same as NAT networking address space. Not sure what the problem is, but try only NAT, in order to avoid confusion and for Host access this is the simple way. You don't need VMware Tools for this to work. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |